Contact Us

Molding and Casting

Volatile Free, Inc. offers rubbers, plastics, and foams specifically formulated to meet molding and casting standards. Our accuracy in properties will provide you with everything you expect from your chemical manufacturer.

Systems

Filter by

VFI®-110 75 D Injectable Plastic

VFI®-110 75 D Injectable Plastic is a fast setting, 75 D hardness, high strength plastic with a quick demold time to increase part production. A high amine content gives good temperature stability and chemical resistance to be used in a variety of applications. VFI-110 is fully paintable when primed or sanded before paint application. A low mixed viscosity between two similar viscosity parts allows this product to be injected into a mold with little air entrapment or waste. VFI- 110 Injectable Plastic can produce a smooth glossy finish or matte finish depending upon the need.

Learn More

VFI®-145 95 A Polyurethane Casting Rubber

VFI®-145 95 A Polyurethane Casting Rubber is a fast setting, 95 A hardness, high durability rubber with good rebound properties to create a versatile urethane rubber. A high amine content gives good chemical resistance and low temperature flexibility for increased use and durability through multiple cycles. VFI-145’s fast setting capabilities gives a quick demold time and increased part production rate. A low viscosity allows for increased part sizes while maintaining final properties.

Learn More

VFI®-176 80 A Polyurethane Casting Rubber

VFI®-176 80 A Polyurethane Casting Rubber is a fast setting, 80 A hardness, high durability rubber with good rebound properties to create a versatile urethane rubber. A high amine content gives good chemical resistance and low temperature flexibility for increased use and durability through multiple cycles. VFI-176’s fast set capabilities allows for a quick demold time and increased part production rate. A low viscosity allows for increased part sizes while maintaining final properties.

Learn More

VFI®-178 90 A Polyurethane Casting Rubber

VFI®-178 90 A Polyurethane Casting Rubber is a fast setting, 90 A hardness, high durability rubber with good rebound properties to create a versatile urethane rubber. A high amine content gives good chemical resistance and low temperature flexibility for increased use and durability through multiple cycles. VFI-178’s fast set capabilities allows for a quick demold time and increased part production rate. A low viscosity allows for increased part sizes while maintaining final properties.

Learn More

VFI®-270 70 A Polyurea Spray Coating

VFI®-270 70 A Polyurea Spray Coating is flexible, fast setting, spray applied coating that is ideal for creating a soft durable film. A 100% solids, two-part spray applied coating, VFI-270 can be sprayed vertically without sagging with good thickness. A polyurea allows for increased impact, thermocycling resistance, and has a low moisture sensitivity for increased usability in all environments. VFI-270 Polyurea Spray Coating is a flexible coating that can be sprayed smooth and works well over flexible foam.

Learn More

VFI®-1678 80 D Injectable Plastic

VFI®-1678 80 D Injectable Plastic is a fast setting, 80 D hardness, high strength plastic with a quick demold time to increase part production. A high amine content gives good temperature stability and chemical resistance to be used in a variety of applications. VFI-1678 is fully paintable when primed or sanded before paint application. A low mixed viscosity between two similar viscosity parts allows this product to be injected into a mold with little air entrapment or waste. VFI- 1678 Injectable Plastic can produce a smooth glossy finish or matte finish depending upon the need.

Learn More

VFI®-2123 20 A TDI Molding Rubber

VFI®-2123 20 A TDI Molding Rubber is a 20 A hardness, urethane molding rubber that provides high durability and easy demolding. This TDI (Toluene Diisocyanate) prepolymer based rubber will decrease moisture sensitivity and give extended working time when working with the material. VFI®-2123’s low viscosity allows for the dissipation of air bubbles without the use of a vacuum chamber. Increased rebound properties allow for easier demolding with less stress on the casted part.

Learn More

VFI®-2133 30 A TDI Molding Rubber

VFI®-2133 30 A TDI Molding Rubber is a 30 A hardness, urethane molding rubber that provides high durability and easy demolding. This TDI (Toluene Diisocyanate) prepolymer based rubber will decrease moisture sensitivity and give extended working time when working with the material. VFI®-2133’s low viscosity allows for the dissipation of air bubbles without the use of a vacuum chamber. Increased rebound properties allow for easier demolding with less stress on the casted part.

Learn More

VFI®-2143 45 A TDI Molding Rubber

VFI®-2143 45 A TDI Molding Rubber is a 45 A hardness, urethane molding rubber that provides high durability and easy demolding. This TDI (Toluene Diisocyanate) prepolymer based rubber will decrease moisture sensitivity and give extended working time when working with the material. VFI®-2143’s low viscosity allows for the dissipation of air bubbles without the use of a vacuum chamber. Increased rebound properties allow for easier demolding with less stress on the casted part.

Learn More

VFI®-2153 55 A TDI Molding Rubber

VFI®-2153 55 A TDI Molding Rubber is a 55 A hardness, urethane molding rubber that provides high durability and easy demolding. This TDI (Toluene Diisocyanate) prepolymer based rubber will decrease moisture sensitivity and give extended working time when working with the material. VFI®-2153’s low viscosity allows for the dissipation of air bubbles without the use of a vacuum chamber. Increased rebound properties allow for easier demolding with less stress on the casted part.

Learn More

Applications

Cast Stone

Cast stone is an industry focused on providing high quality custom concrete stonework for homeowners, engineers, and architects. The speed and cost effectiveness of producing...

Learn More

Industrial Part Making

Custom parts allow for specific requirements to be met that could be in an industrial, prototype, or restoration application. The use of high-end polyurethanes plastics...

Learn More

Manufactured Stone

Manufactured stone is an industry focused on durability and longevity, and their customers always expect quality. In order to produce quality product manufactured stone, makers...

Learn More

Accessories

Videos

Material Calculator

Contractors

Contact Us Today!

Contact Us
Address *
Address

Building Owners

Contact Us Today!

Contact Us
Address *
Address

At VFI we offer solutions to all your project needs. With a talented onsite lab staff, we can customize our products to suit your application requirements. Contact us today to learn more about our custom solutions!