VFI®-3119 60 A Polyurea Hybrid Spray Coating

VFI®-3119 60 A Polyurea Hybrid Spray Coating is a flexible, fast setting, spray applied coating that is ideal for creating a soft durable film. A 100% solids two part spray applied coating, VFI-3119 can be sprayed vertically without sagging and with good thickness. A polyurea hybrid allows for increased impact protection, thermocycling resistance, and is good for internal and external use with a UV stable top coat. VFI-3119 Polyurea Hybrid Spray Coating is extremely flexible with a low modulus allowing it to resist many different types of impact.

60 A Polyurea hybrid sprayed coating that has extremely tough and elastic properties. Can be sprayed on verticals and horizontals with good leveling.

Application Methods:

  • Spray

Available Packaging:

  • Drum

Product Details

  • Product Color: Standard color is cream. Additional colors and color matching services are available contact Volatile Free, Inc.
  • UV Stability: This product is NOT UV color stable. For additional information contact Volatile Free, Inc.
  • Coverage/Thickness Requirement: Contact Volatile Free, Inc. for thickness requirements and specifications.
  • Storage Stability/Shelf Life: 12-month shelf life from date of manufacture when stored and sealed in unopened containers between 40°F - 75°F. Opened containers may be resealed with a nitrogen purge, but shelf life will be significantly shortened. Material should be brought to a minimum temperature of 65°F before use.
  • Equipment: For specific instructions and equipment requirements, contact Volatile Free, Inc.
  • Surface Preparation: Surface preparation depends on application and substrate being coated. All surfaces should be cleaned, prepped and free of any oils, dirt or films that could affect the product's adhesion. Contact Volatile Free Inc. with any additional questions.
  • Mixing: Pre-mixing Poly (B) components until uniform is required before spraying. Mix times may vary depending on volume and mixing method, please contact Volatile Free, Inc. for more information on any specific mixing questions and requirements.
  • Material Application: Temperature should be between 40°F and 100°F when the product is being used. The speed will increase with temperature beyond 72°F. Contact Volatile Free, Inc. for more information on recommended release agents or sealants.
  • Primers: Contact Volatile Free, Inc. with any primer questions.
  • Cleanup: Preferred clean-up solvent is xylene or MEK. Please contact Volatile Free, Inc. for more information on clean-up of equipment and tools.
  • Thinning: Do not thin prior to application.
  • Precautions: Contains isocyanate that may be irritating to the skin and is toxic if inhaled as particulate matter. See Safety Data Sheet for complete safety data. Do not add any foreign material to this product. Avoid prolonged breathing of vapors and prolonged or repeated skin contact. Use only with adequate ventilation.

VFI®-3119 60 A Polyurea Hybrid Spray Coating Physical Properties

  • Hardness Shore A (ASTM B-2240): 67
  • Hardness Shore D (ASTM B-2240): 20
  • Tensile Strenth (ASTM D-412): 1200 psi
  • Elongation (ASTM D-412): 800.00%
  • Tear Strength (ASTM D-624): 240 pli
  • Yield Strength: 175 psi
  • Elastic Modulus: 900 psi
  • Cold Temperature Flexibility (ASTM D-3111): Pass
  • Solid Material Density : 65.60 PCF
  • Water Vapor Permeability (ASTM E96): 1.65 perm
  • Water Absorption (ASTM D2842): 0.015
  • Permanent Set: 30.00%
  • Adhesion Strength Prepared Steel/Prepared Concrete: >500 lbs/in2

VFI®-3119 60 A Polyurea Hybrid Spray Coating Liquid Properties

  • Solids by Weight (ASTM D 1644): 100.00%
  • Solids by Volume (ASTM D2697): 100.00%
  • Liquid Density A Side (ASTM D 2939): 9.07 lbs/gal
  • Liquid Density B Side (ASTM D 2939): 8.47 lbs/gal
  • Mixed Liquid Density (ASTM D 2939): 8.66 lbs/gal
  • Specific Gravity A side: 1.08 g/ml
  • Specific Gravity B side: 1.01 g/ml
  • Specific Gravity Mixed: 1.04 g/ml
  • Ratio by Volume (A:B): 1A:1B
  • Viscosity A side (ASTM D2196): 2000 cps
  • Viscosity B Side (ASTM D2196): 550 cps
  • Gel Time: 12 seconds
  • Tack Free: 45 seconds
  • Recoat Window: 4 hours
  • Place into service: 6 hours light, 48 full
  • Full Cure: 3 days

Applications

Joint Filler

The joint filler industry was developed to specifically handle joint care and maintenance on concrete floors. Concrete joints are a critical part of any floor...

Learn More