VFI®-2622 55 D Polyurethane Spray Coating

VFI®-2622 55 D Polyurethane Spray Coating is a fast setting, spray applied, durable coating with great impact resistance. A 100% solids, two part spray applied coating, VFI-2622 is used as a paintable protective coating. A 55 D hardness provides good rigidity and passes impact tests required to protect many different substrates. VFI-2622 Polyurethane Spray Coating has excellent adhesion, a low set time, and low viscosities for easy application. Primarily used for interior applications, VFI-2622 is a fully paintable and sandable system to allow for easy repairs and to increase aesthetics.

A 55 D fast setting spray applied coating creating a durable film with good impact resistance.

Application Methods:

  • Spray

Available Packaging:

  • Tote
  • Drum

Product Details

  • Product Color: Standard colors are black and neutral. Additional colors and color matching services are available contact Volatile Free, Inc.
  • UV Stability: This product is NOT UV color stable and has no long-term UV testing. For additional information contact Volatile Free, Inc.
  • Coverage/Thickness Requirement: Contact Volatile Free, Inc. for thickness requirements and specifications.
  • Storage Stability/Shelf Life: 12-month shelf life from date of manufacture when stored and sealed in unopened containers between 40°F - 75°F. Opened containers may be resealed with a nitrogen purge, but shelf life will be significantly shortened. Material should be brought to a minimum temperature of 65°F before use.
  • Equipment: For specific instructions and equipment requirements, contact Volatile Free, Inc.
  • Surface Preparation: Surface preparation depends on application and substrate being coated. All surfaces should be cleaned, prepped and free of any oils, dirt or films that could affect the product's adhesion. Contact Volatile Free Inc. with any additional questions.
  • Mixing: Pre-mixing Poly (B) components until uniform is required before injecting or spraying. Mix times may vary depending on volume and mixing method, please contact Volatile Free, Inc. for more information on any specific mixing questions and requirements.
  • Material Application: Temperature should be between 40°F and 100°F when the product is being used. The speed will increase with temperature beyond 72°F. Contact Volatile Free, Inc. for more information on recommended release agents or sealants.
  • Primers: Contact Volatile Free, Inc. with any primer questions.
  • Cleanup: Preferred clean-up solvent is xylene or MEK. Please contact Volatile Free, Inc. for more information on clean-up of equipment and tools.
  • Thinning: Do not thin prior to application.
  • Precautions: Contains isocyanate that may be irritating to the skin and is toxic if inhaled as particulate matter. See Safety Data Sheet for complete safety data. Do not add any foreign material to this product. Avoid prolonged breathing of vapors and prolonged or repeated skin contact. Use only with adequate ventilation.

VFI®-2622 55 D Polyurethane Spray Coating Physical Properties

  • Hardness Shore D (ASTM B-2240): 68
  • Tensile Strenth (ASTM D-412): 3000 psi
  • Elongation (ASTM D-412): 25.00%
  • Flexural (ASTM D-790) Strength/ Modulus: >40,000 psi

VFI®-2622 55 D Polyurethane Spray Coating Liquid Properties

  • Solids by Weight (ASTM D 1644): 100.00%
  • Solids by Volume (ASTM D2697): 100.00%
  • Liquid Density A Side (ASTM D 2939): 9.85 lbs/gal
  • Liquid Density B Side (ASTM D 2939): 9.60 lbs/gal
  • Ratio by Volume (A:B): 1A:1B
  • Viscosity A side (ASTM D2196): 1000 cps
  • Viscosity B Side (ASTM D2196): 2500 cps
  • Gel Time: 15 seconds
  • Cure to touch: 4 minutes
  • Place into service: 4 hours
  • Flash Point (ASTM D-56): >200° F

Applications

EPS Theming Hardcoats

Large scale custom design work is a time intensive and costly process, because of labor and materials. Making custom design work out of EPS is...

Learn More

Resources

Product Data Sheets