VFI®-5110 10 PCF Rigid Polyurethane Foam

VFI®-5110 10 PCF Rigid Polyurethane Foam is a 10lb per cubic foot, rigid pour foam that has good compression strength with a slow initial rise and fast cure speed. VFI-5110 is a two part, one to one by volume that works in any machine injected system while also having a slow enough gel time to allow hand pouring. A fast, final cure speed creates a faster demold time which makes more parts quicker for a quicker return to service. VFI-5110 Rigid Polyurethane Foam helps decrease the cost of plastic parts while still being able to have the necessary final structure of a top coat.

10 PCF Two-part rigid polyurethane foam to be used for parts or general backfill material.

Application Methods:

  • Inject
  • Pour

Available Packaging:

  • Tote
  • Drum
  • 5 Gallon
  • 1 Gallon

Product Details

  • Product Color: Standard color available is neutral. For additional premium colors or color matching services contact Volatile Free, Inc.
  • UV Stability: This product is NOT UV color stable and has no long-term UV testing. For additional information contact Volatile Free, Inc.
  • Coverage/Thickness Requirement: Contact Volatile Free, Inc. for thickness requirements and specifications.
  • Storage Stability/Shelf Life: 12-month shelf life from date of manufacture when stored and sealed in unopened containers between 40°F - 75°F. Opened containers may be resealed with a nitrogen purge, but shelf life will be significantly shortened. Material should be brought to a minimum temperature of 65°F before use.
  • Equipment: For instructions and equipment requirements, contact Volatile Free, Inc.
  • Surface Preparation: All surfaces should be cleaned, prepped and free of any oils, dirt or debris. To demold, material must be non-porous or sealed with a chemical sealant. A release agent should be used on all products intended to be demolded. Contact Volatile Free Inc. with any additional questions.
  • Mixing: Pre-mixing Poly (B) components until uniform is required before combining Poly (B) and Iso (A). If pouring material by hand pre-weighed poly (B) must be poured into pre-weighed Iso (A) and then mixed until uniform and transferred to a new container to mix until uniform again before use. Product must be fully mixed and used before the duration of the cream time (initial rise). Mix times may vary depending on volume and mixing method, please contact Volatile Free, Inc. for more information on any specific mixing questions and requirements.
  • Material Application: Temperature should be between 50°F and 100°F when the product is being used. The pot life will shorten with any increases in temperature beyond 72°F. Ensure surfaces in contact with the material are properly sealed and released before mixing to prevent any unwanted adhesion. Contact Volatile Free, Inc. for more information on recommended release agents or sealants.
  • Primers: Contact Volatile Free, Inc. on any primer questions.
  • Cleanup: Preferred clean-up solvent is xylene or MEK. Please contact Volatile Free, Inc. for more information on clean-up of equipment and tools.
  • Thinning: Do not thin prior to application.
  • Precautions: Contains isocyanate that may be irritating to the skin and is toxic if inhaled as particulate matter. See Safety Data Sheet for complete safety data. Do not add any foreign material to this product. Avoid prolonged breathing of vapors and prolonged or repeated skin contact. Use only with adequate ventilation.

VFI®-5110 10 PCF Rigid Polyurethane Foam Physical Properties

  • Solid Material Density : 10 PCF
  • Dimensional Stability: <1%
  • Compressive Strength (ASTM-1621): 350 psi
  • Closed Cell Content (ASTM D-2856): >90%

VFI®-5110 10 PCF Rigid Polyurethane Foam Liquid Properties

  • Solids by Weight (ASTM D 1644): 100.00%
  • Solids by Volume (ASTM D2697): 100.00%
  • Liquid Density A Side (ASTM D 2939): 10.16 lbs/gal
  • Liquid Density B Side (ASTM D 2939): 8.83 lbs/gal
  • Mixed Liquid Density (ASTM D 2939): 9.50 lbs/gal
  • Specific Gravity A side: 1.22 g/ml
  • Specific Gravity B side: 1.06 g/ml
  • Specific Gravity Mixed: 1.14 g/ml
  • Ratio by Volume (A:B): 1A:1B
  • Ratio by Weight (A:B): 87A:100B
  • Viscosity A side (ASTM D2196): 175 cps
  • Viscosity B Side (ASTM D2196): 1500 cps
  • Gel Time: 200 seconds
  • Cream Time: 70 seconds
  • Rise Time: 200 seconds

Applications

Cast Stone

Cast stone is an industry focused on providing high quality custom concrete stonework for homeowners, engineers, and architects. The speed and cost effectiveness of producing...

Learn More

Manufactured Stone

Manufactured stone is an industry focused on durability and longevity, and their customers always expect quality. In order to produce quality product manufactured stone, makers...

Learn More

Resources

Product Data Sheets