VFI®-#11 9:1 Epoxy Primer

VFI-#11 9:1 Epoxy Primer is a two component, water-based, general use roof primer that adheres well to a variety of substrates. The primer is one part of a full commercial roof restoration system and acts as an adhesion promoter for silicone, acrylic, or urethane roof coatings. Applying VFI’s industry leading epoxy primer is important for increasing the bond of liquid applied roof coatings to any substrate and helps to protect your project from future failures.

Learn More

VFI®-110 75 D Injectable Plastic

VFI-110 75 D Injectable Plastic is a fast–setting, rigid urethane plastic with high strength and a quick demold time for increased part production. Its low viscosity allows it to be used in a reaction injection molding system with reduced air bubbles and waste. Depending on application needs, the plastic can produce a smooth glossy or matte finish. When primed, it is fully paintable, and it cures tough to be machined or sanded. VFI-110’s high amine content provides good temperature stability and chemical resistance to make repeatable castings for a variety of applications, including industrial part–making and prototyping.

Learn More

VFI®-145 95 A Polyurethane Casting Rubber

VFI-145 95 A Polyurethane Casting Rubber is a fast setting, 1:1, hard rubber with good durability and rebound properties. It is capable of being a hand pour material when making smaller parts or for use in an injection system. The material’s fast setting capabilities allow for a quick demold time that increases part production. It provides excellent physical properties, such as good chemical resistance and low-temperature flexibility for increased use through multiple cycles. VFI-145 has a workable viscosity, which allows for increased part sizes that maintain final physical properties. This tough rubber has been used in a variety of applications like mold and model making, prototyping, and industrial part making.

Learn More

VFI®-176 80 A Polyurethane Casting Rubber

VFI-176 80 A Polyurethane Casting Rubber is a fast-setting urethane rubber with good rebound properties. The urethane’s viscosity allows for easy processing when pouring or injecting and the creation of larger castings that maintain final properties. VFI-176 has excellent physical properties and cures at room temperature with no post-curing necessary. With a higher amine content, the rubber provides good chemical resistance, durability, and low-temperature flexibility for longer use of a mold or part. The material’s fast setting capabilities allow for a quick demold time that increases part production.

Learn More

VFI®-178 90 A Polyurethane Casting Rubber

VFI-178 90 A Polyurethane Casting Rubber is a fast-setting urethane rubber with good rebound properties. The urethane’s viscosity allows for easy processing when pouring or injecting and the creation of larger castings that maintain final properties. VFI-178 has superior tensile strength, tear strength, and elongation, providing castings with increased durability and resilience. With a high amine content, the rubber provides good chemical resistance and low-temperature flexibility for extended use of a mold or part. The material’s fast setting capabilities allow for a quick demold time that increases part production.

Learn More

VFI®-200 50 D Slow Polyurea Coating

VFI-200 50 D Slow Polyurea Coating is a two-component, 100% solids, spray-applied coating capable of high builds on metal, concrete, and masonry. It is best used for industrial applications when spraying on horizontal surfaces to create a structure that protects from chemicals, abrasion, and impact. Due to its slower speed, VFI-200 has less chance of creating a heavy surface texture, which is why it is perfect for spraying larger areas that need little to no texture. VFI also offers different formulas in medium (VFI-201) and fast (VFI-202) setting speeds based on application needs.

Learn More

VFI®-201 50 D Polyurea Coating

VFI-201 50 D Polyurea Coating is a fast setting, two-component, 100% solids, spray-applied coating capable of high builds over prepared metal, concrete, and masonry. It is a general-purpose polyurea that has great adhesion to many surfaces with properties that allow for flexibility when spraying vertically or horizontally. VFI-201 is best used for industrial applications to create a structure over surfaces that need protection from chemicals, abrasion, and impact. Based on application needs, VFI offers different formulas with faster (VFI-202) and slower (VFI-200) setting speeds.

Learn More

VFI®-202 50 D Fast Polyurea Coating

VFI-202 50 D Fast Polyurea Coating is a fast-setting, two-component, spray-applied coating that excels at low-build, thinner passes on prepared metal, concrete, and masonry surfaces. It is best used for industrial applications when spraying vertically or overhead and won’t drip. It creates structure over the surface to provide protection from chemicals, abrasion, and impact. The coating is perfect when a faster setting time is needed, and self-texturing is desired. VFI offers different polyurea formulas in slow (VFI-200) and medium (VFI-201) setting speeds based on application needs.

Learn More

VFI®-206 60 D Polyurea Hybrid Coating

VFI-206 60 D Polyurea Hybrid Coating is a fast-setting spray coating that can be applied in high builds to achieve extended abrasion resistance. With excellent tensile strength and elongation, the two-part polyurea hybrid protects horizontal, vertical, and overhead surfaces from impact and chemical corrosion. VFI-206 is an efficient, highly durable coating that is easy to spray and best used for industrial applications to create a structure over surfaces that need protection.

Learn More

VFI®-270 70 A Polyurea Spray Coating

VFI-270 70 A Polyurea Spray Coating is a flexible spray-applied coating that creates a smooth, durable film on flexible surfaces. The two-component material is 100% solids and has fast-setting capabilities to achieve high builds on vertical surfaces without sagging. As a polyurea, it has resistance to impact and thermocycling as well as low moisture sensitivity for use in all environments. VFI-270 provides an elastomeric surface without adding too much structure or weight.

Learn More