Contact Us

Deck Coatings

Volatile Free, Inc. offers primers, single component, and dual component coatings specifically formulated to meet deck coating standards. Our accuracy in properties will provide you with everything you expect from your coatings manufacturer.

Systems

Filter by

VFI®-#11 9:1 Epoxy Primer

VFI-#11 9:1 Epoxy Primer is a two component, water-based, general use roof primer that adheres well to a variety of substrates. The primer is one part of a full commercial roof restoration system and acts as an adhesion promoter for silicone, acrylic, or urethane roof coatings. Applying VFI’s industry leading epoxy primer is important for increasing the bond of liquid applied roof coatings to any substrate and helps to protect your project from future failures.

Learn More

VFI®-608 Waterproofing Concrete Additive

VFI-608 Waterproofing Concrete Additive is a water-based, 100% acrylic admixture that is added to cement to create a reinforced waterproof barrier. Once mixed, it becomes a durable compound designed to be used in combination with fabric over masonry and concrete surfaces. VFI-608 is stiffer, more rigid, and applies thick to protect the underlying substrate from cracking. As an acrylic based additive, it’s a more environmentally friendly product. It can also be used in deck restoration applications.

Learn More

VFI®-695 Silicone Waterproofing Sealant

VFI®-695 Silicone Waterproofing Sealant is a water repelling formulation providing a durable subsurface barrier. Water-based silicone technology provides the benefits of silicone chemistry’s chemical resistances to water and oil, while still providing a low VOC. VFI-695 was made to protect masonry products without leaving a visible residue affecting finished appearances.

Learn More

VFI®-3218 1:1 Epoxy Primer

VFI-3218 1:1 Epoxy Primer is a two-component, water-based roof primer that can adhere to many different substrates. It promotes the bond between silicone, acrylic, or urethane roof coatings and almost any existing roof substrate. A strong epoxy primer will prepare your roof for the application of a maintenance coating, eliminating adhesion failures and the need for costly repairs.

Learn More

VFI®-3221 Non-Aggregate Single Component

VFI®-3221 Non-Aggregate Single Component is a water based vinyl acrylic that has great aesthetic appeal on rigid surfaces. Vinyl acrylics are extremely hard and repel water to make durable and long lasting coatings. VFI-3221 Non-Aggregate Single Component provides UV stability and works as a coating in many commercial and residential applications.

Learn More

VFI®-3401 Vertical Polyurethane Base Coat

VFI®-3401 Vertical Polyurethane Base Coat is used as a protective elastomer for strength and waterproofing on vertical applications. Vertical urethane base coat provides strength, toughness, and vertical hang to build thickness quickly without the need of multiple coats. VFI-3401 works best with a silicone or acrylic topcoat in order to provide waterproofing and UV stability. VFI-3401 Vertical Polyurethane Base Coat has no VOC’s and can be used in areas with strong VOC regulations.

Learn More

VFI®-3600BM Polyurethane Base Coat

VFI®-3600BM Polyurethane Base Coat is used as a protective elastomer for impact and strength. A polyurethane base coat provides strength and toughness underneath a UV stable top coat in order to increase the properties as a system. An easy 1 to 1 mix ratio allows for rolling VFI-3600BM and does not require a two component sprayer to apply. VFI-3600BM Polyurethane Base Coat has zero VOC’s and can be used in areas with strong VOC regulations.

Learn More

VFI®-3600F Fast Polyurethane Base Coat

VFI®-3600F Fast Polyurethane Base Coat is used as protective elastomer for impact and strength. A urethane base coat provides strength and toughness underneath a UV stable top coat in order to increase the properties as a system. Using a plural component sprayed system the VFI-3600F provides the ability to recoat same day for a faster, more time efficient method. VFI-3600F Fast Polyurethane Base Coat has zero VOC’s and can be used in areas with strong VOC regulations.

Learn More

VFI®-5000 90 A Expansion Joint Filler

VFI®-5000 90 A Expansion Joint Filler is a two-part, 90 A hardness joint filler ideal for providing a seal within a joint. The strong elastomeric properties of VFI-5000 are critical when expansion and contraction occurs to make sure the joint stays sealed. VFI-5000 Expansion Joint Filler has a fast cure time for decreased down time allowing the material to be trimmed quickly after application. Whether machine dispensed or using the QWIK SPRAY SYSTEM, VFI-5000 gives the versatility to be either a patching joint filler or the primary joint filler.

Learn More

VFI®-5011 80 A Expansion Joint Filler

VFI®-5011 80 A Expansion Joint Filler is a two-part, 80 A hardness joint filler ideal for providing a seal within a joint. The strong elastomeric properties of VFI-5011 are critical when expansion and contraction occurs to make sure the joint stays sealed. VFI-5011 Expansion Joint Filler has a fast cure time for decreased down time allowing the material to be trimmed quickly after application. Whether machine dispensed or using the QWIK SPRAY SYSTEM, VFI-5000 gives the versatility to be either a patching joint filler or the primary joint filler.

Learn More

Applications

Above Grade Waterproofing

Above grade waterproofing is a massive industry that focuses on both commercial and residential segments and we have strived to provide chemical options for both...

Learn More

Below Grade Waterproofing

Below grade waterproofing is an application that must be done quickly and correctly, or it will have lasting implications on the structure. Several methods exist...

Learn More

Joint Filler

The joint filler industry was developed to specifically handle joint care and maintenance on concrete floors. Concrete joints are a critical part of any floor...

Learn More

Accessories

Videos

Material Calculator

Contractors

Contact Us Today!

Contact VFI
Address *
Address

Building Owners

Contact Us Today!

Contact VFI
Address *
Address

Have Questions?

A member of our team is ready to help you with any questions. As a smaller manufacturer we value our professional relationships. We recognize that each and every customer contributes to our success. So, when it comes to a new idea, we embrace the opportunity to form a relationship and offer a quality product to help our partners grow. We believe it is the correct way to do business. There can be times when a customer may have a problem with one of our products. This gives us the opportunity to see if an improvement  can be made to the product they are using or if they are using the product incorrectly. Whether the product needs improvement or we can help our partner refine their process, it’s  a working relationship with a combined goal. Success.

CONTACT US



At VFI we offer solutions to all your project needs. With a talented onsite lab staff, we can customize our products to suit your application requirements. Contact us today to learn more about our custom solutions!