Theming

VFI®-2519 75 D Brushable Hard Coat

VFI-2519 75 D Brushable Hard Coat is a 1A:3B, brush-applied, polyurethane coating. It is used in conjunction with other hard coats as a patch repair or as the hard coat itself on small projects. It cures in thin films to provide structure to EPS foam for theming designs and fabrication. VFI-2519 offers a long pot life for extended workability and can be applied vertically without sagging. After sanding and priming, the hard coat can be painted to blend in with existing applications or to improve the aesthetics of smaller pieces.

VFI®-2626 65 D Brushable Hard Coat

VFI-2626 65 D Brushable Hard Coat is a 1A:3B by volume, two-component polyurethane coating. Since it is applied by brush or trowel, it’s used as a patch repair material with other hard coats or as a hard coating material on small-scale projects. It provides deformable surfaces such as EPS and other foams with structure and high rigidity for protection from impacts. The coating can be textured if desired but can also be sanded, primed, and painted to improve the aesthetics of smaller pieces. VFI-2626 is capable of passing UL-94 V0.

VFI®-3131 65 A Polyurea Hybrid Spray Coating

VFI-3131 65 A Polyurea Hybrid Spray Coating is a premium, 100% solids, fast setting coating. Once applied, it creates a seamless membrane over flexible surfaces such as flexible foam. It can be used for interior or exterior applications when covered with a UV-stable top coat. As a polyurea hybrid, it has outstanding durability and good chemical resistance, with fire retardant built into its formula. Its high tensile strength and elongation make it a tough, versatile coating that provides a flexible surface with good structural strength and rebound.

VFI®-6150 50 D Spray Hard Coat

VFI-6150 50 D Spray Hard Coat is a premium, fast-setting, spray-applied polyurea coating. Once applied, it creates a protective shell over foam and is used for interior and exterior applications when covered with a UV-stable top coat. As a polyurea, it has good thermocycling, strong impact resistance, and is moisture insensitive. VFI-6150 is fully paintable for theming purposes. It is Class A fire-tested to meet safety requirements when needed. Its high tensile strength and elongation make it a tough, versatile coating for encapsulating and protecting a substrate.

VFI®-6170 70 D Spray Hard Coat

VFI-6170 70 D Spray Hard Coat is a fast-setting, two-component, spray-applied polyurethane coating for theming and industrial design. When sprayed thick, the coating provides a durable, protective shell-like layer over structural shapes, 3-D sculptures, or other entertainment props primarily made with EPS foam. It is meant to be used by trained professionals who are familiar with high-pressure spray equipment. VFI-6170 is great for interior applications where Class A fire testing is necessary. The coating cures in seconds, so it can be sanded and painted shortly after spraying to achieve the desired finish and aesthetic.

VFI®-6171 70 D Qwik Spray Hard Coat

VFI-6171 70 D Qwik Spray Hard Coat is a two-part, user-friendly, polyurethane cartridge system that uses the portable, cost-effective VFI-7500 Qwik Spray Gun. It is designed as long-lasting protection for theming sculptures, parts, and components. Since the Qwik Spray System® is portable, VFI-6171 can also be used for on-site touch-up work or bonding large pieces together. It is mainly used as a durable protective layer over foam for interior applications that require fire testing. Once cured, the coating can be sanded and painted to make repairs or improve aesthetics on any project.

VFI®-7500 Qwik Spray Gun

VFI-7500 Qwik Spray Gun is a pneumatically driven, dual piston air gun capable of spraying 750ml dual cartridge systems. This easy-to-use, portable gun will save you time and money on expensive applications and repairs. VFI-7500 maximizes spray efficiency, so there is no need for a larger component machine. Use the proper personal protective equipment when spraying to minimize workplace hazards.

How to Use the Qwik Spray System (W/ Pictures)

*This spray gun requires the use of a minimum 100 PSI pneumatic air compressor.

VFI®-8005 Pump Flush

VFI-8005 Pump Flush is a chemically dry, nonflammable liquid flushing material for quickly removing residual polyurethane and polyurea material from high-pressure spray equipment. The maintenance and cleaning of your spray equipment is important to keep it running efficiently. Keeping unused material inside your equipment can shorten the life of the lines if it’s not cleaned out properly after each use. After spraying polyurethane or polyurea through your equipment, use VFI-8005 to thoroughly clean your machine.

VFI®-8011 Pump Lube

VFI-8011 Pump Lube is a 100% solids, nonflammable liquid pump lube that works in most automatic lubrication systems and high-pressure spray equipment to remove residual polyurethane or polyurea material from spray lines. The maintenance and cleaning of your spray equipment is important to keep it running efficiently. Keeping unused materials inside your spray equipment can shorten the life of the lines if it’s not cleaned out properly after each use. After spraying urethane or polyurea through your equipment, use VFI-8011 to thoroughly clean your machine.