SEALGUARD VFI-990 SILICONE / Volatile Free, Inc.

SEALGUARD VFI-990 SILICONE - Mod Bit/BUR

SEALGUARD VFI-990 SILICONE Advantages

100% UV resistant
Seamless-No leaks; superior protection from leaks, rust and corrosion
Ponding water resistant
Single component
Low VOC's
93% solids by volume require less material to achieve desired film thickness
Superior waterproofing protection
Excellent weatherability; Features high tensile strength, elongation, hardness and tear resistant physical properties
Self-flashing greatly reduces or eliminates parapet, stack, vent and pitch pocket leaks
Seals cracks and crevices better than other roofing products due to its elastomeric properties
Renewable through easy recoating - easy maintenance without compromising the integrity of the roof
Energy cost savings due to the product’s solar reflectivity; lowers air conditioning costs

Request Literature Contact Us

Application

SEALGUARD VFI-990 SILICONE is a single component solventless moisture cure elastomer, designed for use as a cure in place waterproofing roof coating system which can be sprayed, rolled or brushed onto the desired substrate.

If sprayed, use single component spray equipment capable of maintaining a minimum constant spray pressure of 5000 psi. 5:1 transfer pump should be used with drums. Any transfer equipment used should have Buna-L jacketed hoses to eliminate moisture contamination to the silicone. Make sure to mix the product prior to application.

It is not recommended to apply this product below 50°F or if there is rain predicted within hours of application. Make sure to clean up and recirculate equipment with mineral spirits.