VFI®-3130 60 D Spray Hard Coat

VFI®-3130 60 D Spray Hard Coat is a fast setting, spray applied coating that is highly durable with good impact resistance. VFI-3130 is a 100% solids, two part spray applied coating with Class A fire testing that is fully sandable once cured. Good thermocycling capabilities and strong impact resistance allows for use on interior and exterior applications with the use of a UV stable top coat. VFI-3130 Spray Hard Coat has high tensile strength and good elongation that builds a tough, versatile coating for a wide variety of uses.

60 D Two-part sprayed polyurea hybrid that is fire tested and passes a Class A. Has good imapact and elastic properties for thermocycling.

Related Industries:

Application Methods:

  • Spray

Available Packaging:

  • Tote
  • Drum

Product Details

  • Product Color: Standard color is neutral. Additional colors and color matching services are available contact Volatile Free, Inc.
  • UV Stability: This product is NOT UV color stable. For additional information contact Volatile Free, Inc.
  • Coverage/Thickness Requirement: Contact Volatile Free, Inc. for thickness requirements and specifications.
  • Storage Stability/Shelf Life: 12-month shelf life from date of manufacture when stored and sealed in unopened containers between 40°F - 75°F. Opened containers may be resealed with a nitrogen purge, but shelf life will be significantly shortened. Material should be brought to a minimum temperature of 65°F before use.
  • Equipment: For specific instructions and equipment requirements, contact Volatile Free, Inc.
  • Surface Preparation: Surface preparation depends on application and substrate being coated. All surfaces should be cleaned, prepped and free of any oils, dirt or films that could affect the product's adhesion. Contact Volatile Free Inc. with any additional questions.
  • Mixing: Pre-mixing Poly (B) components until uniform is required before injecting or spraying. Mix times may vary depending on volume and mixing method, please contact Volatile Free, Inc. for more information on any specific mixing questions and requirements.
  • Material Application: Temperature should be between 40°F and 100°F when the product is being used. The speed will increase with temperature beyond 72°F. Contact Volatile Free, Inc. for more information on recommended release agents or sealants.
  • Primers: Contact Volatile Free, Inc. with any primer questions.
  • Cleanup: Preferred clean-up solvent is xylene or MEK. Please contact Volatile Free, Inc. for more information on clean-up of equipment and tools.
  • Thinning: Do not thin prior to application.
  • Precautions: Contains isocyanate that may be irritating to the skin and is toxic if inhaled as particulate matter. See Safety Data Sheet for complete safety data. Do not add any foreign material to this product. Avoid prolonged breathing of vapors and prolonged or repeated skin contact. Use only with adequate ventilation.

VFI®-3130 60 D Spray Hard Coat Physical Properties

  • Hardness Shore D (ASTM B-2240): 52
  • Tensile Strenth (ASTM D-412): 3400 psi
  • Elongation (ASTM D-412): 500.00%
  • Tear Strength (ASTM D-624): 525 pli
  • Cold Temperature Flexibility (ASTM D-3111): Pass
  • Solid Material Density : 73.3 lb/ft3
  • Water Vapor Permeability (ASTM E96): 1.25 perm
  • Water Absorption (ASTM D2842): <1%
  • Permanent Set: 10.00%

VFI®-3130 60 D Spray Hard Coat Liquid Properties

  • Solids by Weight (ASTM D 1644): 100.00%
  • Solids by Volume (ASTM D2697): 100.00%
  • Liquid Density A Side (ASTM D 2939): 9.8 lbs/gal
  • Liquid Density B Side (ASTM D 2939): 9.8 lbs/gal
  • Mixed Liquid Density (ASTM D 2939): 9.75 lbs/gal
  • Specific Gravity A side: 1.17 g/ml
  • Specific Gravity B side: 1.17 g/ml
  • Specific Gravity Mixed: 1.17 g/ml
  • Ratio by Volume (A:B): 1A:1B
  • Viscosity A side (ASTM D2196): 600 cps
  • Viscosity B Side (ASTM D2196): 1500 cps
  • Gel Time: 12 seconds
  • Tack Free: 25 seconds
  • Recoat Window: 4 hours
  • Place into service: 6 hours light, 48 full
  • Full Cure: 3 days

Applications

EPS Theming Hardcoats

Large scale custom design work is a time intensive and costly process, because of labor and materials. Making custom design work out of EPS is...

Learn More

Resources

Product Data Sheets