News Articles

How much does it cost?

VFI strives to keep our prices competitive, but it ultimately depends on the availability of raw materials and the materials used in the formula. Also,…

Read More

What happens if the bedliner is damaged? Is it repairable?

Yes, Volatile Free, Inc. offers a bedliner repair material called VFI-520 QS Bedliner Repair that you can use on scratches, blisters, and other damages. It…

Read More

How to clean spray on bedliner?

Regularly remove dirt, debris, and other grime that has built up from use. You can use a hose or a pressure washer to clean the…

Read More

How long do polyurea hybrid coatings last?

When applied correctly and regularly maintained, a spray on truck bedliner should last the entire life of the truck. If repair is needed, VFI offers…

Read More

Will the bedliner fade over time?

Yes. All VFI bedliners are aromatic, which means they are not UV-stable. If you want to maintain the color of your bedliner, you’ll need to…

Read More

How soon can the truck bed be used after spraying?

We recommend waiting at least 4 hours after application for light use of your truck bed and a full day (24 hours) before heavy-duty use….

Read More

How much material do I need to coat a truck bed?

When spraying VFI-544, we recommend using 6 cartridges (a full case). A full case is just under 2 gallons of material and gets you around…

Read More

How thick should I apply the bedliner?

VFI recommends applying the material at a minimum of 80 mils for long-lasting results.

Read More

How long does it take to spray a truck bed?

It can take 2-4 hours to prepare the surface by sanding or priming, tape off areas you don’t want material to get onto, and then…

Read More

Do I need a primer?

Primers are usually not required on properly prepared metal surfaces. Scuff the areas you are coating with a wire cup brush sander or 40-grit sandpaper….

Read More

What surface prep is required before applying spray on bedliner?

The surface must be cleaned with acetone before application. Tape up the truck bed with wire trim tape and shield surfaces from overspray with plastic…

Read More

What temperature should I use the material at?

VFI spray on bedliners must be sprayed between 40°F and 100°F. The cure speed of the material will increase if the temperature passes 72°F.

Read More

Does your spray on bedliner come in different colors?

VFI high-pressure, low-pressure, and Qwik Spray bedliners can be pigmented. The premium colors offered are light gray, red, blue, pewter, yellow, and green. These materials…

Read More

What kind of packaging do your bedliners come in?

For our high pressure bedliner, it can be purchased in drums or totes. The low pressure bedliner can be purchased in pails, drums or totes….

Read More

Is high pressure material better than low pressure material?

While some manufacturers will tell you that high pressure is better than low pressure bedliners, they both perform as expected. Our low-pressure spray bedliner is…

Read More

What are the application options for your bedliner?

VFI spray on bedliner comes in three formulas: high pressure, low pressure, and Qwik Spray for different processing needs.

Read More

Does the spray on truck bedliner withstand temperature extremes?

VFI bedliners offer extended protection from wear in extreme temperatures while maintaining flexibility to prevent cracking. They also form a seamless membrane to keep water…

Read More

How are spray in bedliners better than drop in liners?

Spray in bedliners offer more durability than drop in liners. Drop in liners have to frequently be replaced because they crack, break, and warp over…

Read More

What is the difference between an aliphatic and aromatic bedliner?

Aliphatic bedliners are UV stable and will not fade over time, while aromatic bedliners will fade and chalk over time when in direct sunlight. Most…

Read More

What is your spray on bedliner made of?

VFI’s bedliners are a cost-effective blend of both polyurethane and polyurea. They offer the best characteristics of each material, including properties, cost, and moisture sensitivity.

Read More