VFI®-851 Polyurethane Foam Adhesive

VFI®-851 Polyurethane Foam Adhesive is a water blown urethane foam that is applied in beads to hold down insulation panels with little pressure needed. VFI-851 has a quick rise time and cure time allowing for more square footage to be covered in a single day without the use of solvent or water based adhesive. VFI-851 Polyurethane Foam Adhesive can adhere, with great adhesion, to many different types of substrates.

Two part spray foam adhesive effectively locks down insulation panels without the use of any mechanical fasteners.

Features & Benefits

  • 2 PCF Water-Blown Polyurethane Foam Adhesive
  • Faster Rise and Cure Promotes Maximum SQFT Coverage
  • Superior Adhesion Over Various Substrates
  • Exceptional Durability from a Trusted Manufacturer
  • Formulated for Use Over: Metal, Mod/Bit, BUR, Single-Ply, Concrete

Related Industries:

Application Methods:

  • Spray
  • Inject

Available Packaging:

  • Drum
  • 5 Gallon

Product Details

  • Product Color: Standard color available is neutral. For additional premium colors or color matching services contact Volatile Free, Inc.
  • UV Stability: This product is NOT UV color stable and has no long-term UV testing. For additional information contact Volatile Free, Inc.
  • Coverage/Thickness Requirement: Contact Volatile Free, Inc. for thickness requirements and specifications.
  • Storage Stability/Shelf Life: 12-month shelf life from date of manufacture when stored and sealed in unopened containers between 40°F - 75°F. Opened containers may be resealed with a nitrogen purge, but shelf life will be significantly shortened. Material should be brought to a minimum temperature of 65°F before use.
  • Equipment: For instructions and equipment requirements, contact Volatile Free, Inc.
  • Surface Preparation: All surfaces should be cleaned, prepped and free of any oils, dirt or debris. Contact Volatile Free Inc. with any additional questions.
  • Mixing: Pre-mixing Poly (B) components until uniform is required before injecting or spraying. Mix times may vary depending on volume and mixing method, please contact Volatile Free, Inc. for more information on any specific mixing questions and requirements.
  • Material Application: Temperature should be between 50°F and 100°F when the product is being used. The reaction time will shorten with any increases in temperature beyond 72°F. Contact Volatile Free, Inc. for more information on material applications.
  • Primers: Contact Volatile Free, Inc. on any primer questions.
  • Cleanup: Preferred clean-up solvent is xylene or MEK. Please contact Volatile Free, Inc. for more information on clean-up of equipment and tools.
  • Thinning: Do not thin prior to application.
  • Precautions: Contains isocyanate that may be irritating to the skin and is toxic if inhaled as particulate matter. See Safety Data Sheet for complete safety data. Do not add any foreign material to this product. Avoid prolonged breathing of vapors and prolonged or repeated skin contact. Use only with adequate ventilation.

VFI®-851 Polyurethane Foam Adhesive Physical Properties

  • Free Rise Density (ASTM D-1622 PCF): 2 PCF

VFI®-851 Polyurethane Foam Adhesive Liquid Properties

  • Solids by Weight (ASTM D 1644): 100.00%
  • Solids by Volume (ASTM D2697): 100.00%
  • Liquid Density A Side (ASTM D 2939): 10.16 lbs/gal
  • Liquid Density B Side (ASTM D 2939): 9.16 lbs/gal
  • Mixed Liquid Density (ASTM D 2939): 9.66 lbs/gal
  • Specific Gravity A side: 1.22 g/ml
  • Specific Gravity B side: 1.1 g/ml
  • Specific Gravity Mixed: 1.16 g/ml
  • Ratio by Volume (A:B): 1A:1B
  • Viscosity A side (ASTM D2196): 145 cps
  • Viscosity B Side (ASTM D2196): 1250 cps
  • Gel Time: 22 seconds
  • Tack Free Time: 15-30 minutes

Systems Used In

Applications

Liquid Applied Roofing

Leaky roofs cause expensive, time intensive, and intrusive work that affects the life of a building and the activity within. Several permanent solutions exist to...

Learn More

Resources

Product Data Sheets