VFI®-695 Silicone Waterproofing Sealant

VFI®-695 Silicone Waterproofing Sealant is a water repelling formulation providing a durable subsurface barrier. Water-based silicone technology provides the benefits of silicone chemistry’s chemical resistances to water and oil, while still providing a low VOC. VFI-695 was made to protect masonry products without leaving a visible residue affecting finished appearances.

Single component silicone concrete waterproofing with a low visocsity and dries without leaving a visible residue.

Related Industries:

Application Methods:

  • Spray
  • Brush
  • Roll

Available Packaging:

  • 5 Gallon
  • 1 Gallon

Product Details

  • Product Color: Standard color is clear and non-visible.
  • UV Stability: N/A
  • Coverage/Thickness Requirement: See VFI specifications for specific coverage information or contact Volatile Free, Inc. for additional coverage/thickness requirements.
  • Storage Stability/Shelf Life: 12-month shelf life from date of manufacture when stored and sealed in unopened containers between 40°F - 75°F. Water based products must be protected from freezing. Material should be brought to a minimum temperature of 65°F before use.
  • Equipment: 695 clear silicone waterproofing may be applied by single component sprayer, roller, or brush. Contact Volatile Free, Inc. for more information on any specific equipment questions and requirements.
  • Surface Preparation: Surface preparation depends on application and substrate being coated. All surfaces should be cleaned, prepped, dry and free of any oils, dirt or films that could affect the product adhesion. Contact Volatile Free Inc. with any additional questions.
  • Mixing: Mixing until uniform is required on all material before use. Mix times may vary depending on volume and mixing method, please contact Volatile Free, Inc. for more information on any specific mixing questions and requirements.
  • Material Application: Material can be applied between 50°F - 120°F and the temperature must remain above 40°F until full cure. Apply only when rain or other moisture contamination will not be present before fully cured. Standard application rate is 1 gallon per 100 square feet. The time between subsequent coats should not exceed 48 hours or the material will block any additional applications. Material cure time will vary with temperature.
  • Primers: N/A
  • Cleanup: Preferred clean-up method is water. Please contact Volatile Free, Inc. for more information on clean-up of equipment and tools.
  • Thinning: Do not thin prior to application.
  • Precautions: See Safety Data Sheet for complete safety data. Do not add any foreign material to this product. Avoid prolonged breathing of vapors and prolonged or repeated skin contact. Use only with adequate ventilation.

VFI®-695 Silicone Waterproofing Sealant Liquid Properties

  • Solids by Weight (ASTM D 1644): 7.00%
  • Solids by Volume (ASTM D2697): 7.00%
  • Liquid Density (ASTM D 2939): 8.19 lbs/gal
  • Specific Gravity: 0.98 g/mL
  • Viscosity (ASTM D2196): 5 cps
  • Flash Point (ASTM D-56): >200°F


Above Grade Waterproofing

Above grade waterproofing is a massive industry that focuses on both commercial and residential segments and we have strived to provide chemical options for both...

Learn More


Product Data Sheets