VFI-716 is an open cell, 0.5 lb. density, spray polyurethane wall foam. A cost effective combination of R-Value and air infiltration control within a spray foam application. Invest in VFI-716 to reduce your heating and cooling costs. VFI-716 is typically applied on exterior walls, interior walls, vented attics, un-vented attic assemblies and between floors and ceilings. Evaluation Service Report: IAPMO ER-414.

VFI-716 Open Cell Spray Foam
Spray Polyurethane Foam Alliance

VFI-716 Advantages

  • Reduce heating and cooling costs by 40% or more
  • Great combination of R-Value and reduction of air infiltration
  • High R-Value - 3.7/inch
  • VFI-716 will not sag or settle over the lifetime of your structure
  • Consistent air control thoughout home or building
  • VFI-716 will not support the growth of mold or mildew
  • Provides excellent sound dampening


VFI-716 is a low viscosity, 0.5 lb density open cell insulating material. VFI-716 is designed to provide significant control of air infiltration along with a high R-Value per inch. When properly installed by a trained contractor VFI-716 quickly expands to fill the cracks, crevices, gaps and voids that exist in every structure. 

The proportioning pump ratio is 1 to 1 by volume. The pre-heater initial setting should be 125°F. The initial hose temperature should be 125°F. Equipment must be capable of maintaining temperature settings. 

Contact us today at (800) 307-9218 and let our experts assist you with your order.

Product Data Sheets