Case Study: Farha Roofing uses SEALGUARD SILICONE system to restore an EPDM roof!

Roof History

Farha Roofing got the call to come out and inspect an 80,000 square foot shopping center type facility. The owner explained that the Single-ply, EPDM, roof was out of warranty and starting to leak. Farha Roofing found that in addition to leakage there was also some ponding water, making SEALGUARD VFI-990 SILICONE an excellent choice.

Before: EPDM roof with ponding water

The Solution

Farha Roofing chose to use a Volatile Free, Inc. Roofing solution. This included:

1.  VFI-#11 Water Based Epoxy Primer

2.  VFI-Butyl Tape

3.  SEALGUARD VFI-990 SILICONE

Primed roof with VFI-#11 Water Based Epoxy Primer

The Installation

First, Farha Roofing thoroughly cleaned the EPDM roof. Second, they applied the VFI-#11 Water Based Epoxy Primer for the best adhesion. Third, Farha used Butyl Tape to seal seams, termination and penetrations that needed extra reinforcement. Last, they spray applied SEALGUARD VFI-990 SILICONE to complete the project.

Butyl tape installed on necessary seams to prevent leaks

The Result

This system stopped all leaks, restored integrity to the roof and saved the business a costly tear off.

After: SEALGUARD VFI-990 SILICONE coats the entire roof!

Product Information

VFI-#11 Water Epoxy Primer is a general purpose, two component, water based, epoxy primer. It provides excellent adhesion and superior strength to most metal, mod bit/BUR, single-ply, concrete and wood.

The SEALGUARD VFI-990 SILICONE is a cool roof coating and is UL, Energy Star, Miami Dade, FM and T24 certified. SEALGUARD VFI-990 SILICONE is also  a single component, high solid roof coating. it forms an elastomeric waterproof, white membrane and protects your roof from water damage and UV deterioration.

Leave a Reply

Your email address will not be published. Required fields are marked *