VFI-3140 is an aromatic polyurea hybrid elastomeric polymer. It is used as a structural coating because of its high hardness and tensile strength with good elongation, chemical and solvent resistance and usability under wide climatic conditions. 

VFI-3140 Polyurea Spray Elastomer System

VFI-3140 Advantages

  • Low VOC's
  • Superior hardness
  • Impact resistant
  • Waterproof encapsulating material
  • Structural for foam sculptures
  • Standard color is cream
  • Two component systems
  • 100% solids
  • Sprayable and brushable

Application

VFI-3140 is a two component, 100% solids, one to one by volume, aromatic polyurea hybrid elastomeric polymer. It is characterized by high hardness and tensile strength with good elongation, good chemical and solvent reistance and usability under wide climatic conditions with outstanding durability.

VFI-3140 requires hot airless plural component equipment capable of producing a minimum spray pressure of 2000psi and heat to 140°F to 160°F. Higher pressures between 2000-3000 psi may provide better mixing with optimal physical properties for the end product. 

The product must be over 70°F for proper mixing and application. Sealing porous surfaces with VFI-1007 Primer is recommended.

Contact us today at (800) 307-9218 and let our experts assist you with your order.

Product Data Sheets