VFI™ offers a selection of rigid, closed cell and flexible foams for a variety of commercial and industrial applications.
Roofing Application
VFI-730 Spray Foam can cover more square feet of roof than any other brand.
VFI-730 Polyurethane Foam is an advanced, energy efficient, long lasting,
sprayable foam product for new roofs or application on existing roofs. It’s
offered in three reactivity grades to work under a wide range of surface
temperatures.
Save time and money. No need to remove existing roof substrates.
- Environmentally Safe - Dade County Approved - UL Approved
- Lower heating and cooling costs. Increase the roof’s “R” value. Reduce thermal shock.
- No seams – no leaks. Volatile Free’s VFI-730 SPF in
combination with VFI-540 Aluminum Polyurea Hybrid Coating or VFI-535
Copper Coating forms a superior, seamless roofing system.
- Self-flashing – Conforms to any shape and leaves no gaps.
- Renewable – The roof’s future integrity is easily renewable through the application of one of Volatile Free’s environmentally safe elastomer coatings.
- Lightweight – The stone ballast that is removed weighs more than the foam that replaces it, reducing roof sag risk. Better snow load tolerance.
- Longer life – The VFI roof coating system will encapsulate
and protect the roof for up to 15 years.
- Exceptional wind uplift resistance.*
* “The application of sprayed foam to
steel deck and plywood deck demonstrated uplift load resistance up
to the capacity of the test equipment to develop load (160 – 165 psf)
without any sign of delamination or other damage to the foam.”
-Underwriters Laboratory, Inc. |
Insulation Spray Foam
Keep the inside in and the outside out with the VFI-714 Polyurethane Class I, 1.9 lb. Spray Foam System.
Class I ASTM E-84 (Flame Spread Index 15, Smoke Development Index 450)
“Spray polyurethane foam alone can provide an
air and water-tight barrier”
-US Department of Commerce brochure, NISTIR4821 |
- Meets Energy Star standards
- Certified high rating for fire and smoke resistance.
- VFI-714's closed cell, initial R-7.7 / in. initial and R-7.0 / in.
cured rating in a 2x4 wall is greater
than the “R” rating of 6 inches of fiberglass in a 2x6 wall.
- VFI-714 can retard the formation of mold and mildew inside of a
wall.
- VFI-714 provides a tight seal against outside elements, allergens
and pollutants around windows, doors electrical outlets and
penetrations.
- Helps keep pests outside.
- Eliminates some of the costs associated with weatherizing a
building, such as caulking, installing vapor and wind barriers and
taping joints.
- Outside noise is greatly reduced and wall strength is increased.
- No settling and fills hard to reach areas.
- Deflects water leaks and will not absorb moisture.
VFI-714 will last as long as the wall because it is an inert polymer.
Flexible Spray Foams
VFI’s two-component, flexible polyurethane spray foams contain no CFC’s.
These foams are self-leveling, have outstanding rebounding properties and
soft feel when used for in-mold coatings and post-applied coatings.
These foams are easy to apply and have excellent “flow-out” characteristics
when used on another foam or substrate.
End-use applications include “soft touch” and “soft play” applications and
they are also utilized in OEM fabrication for the automotive, off-highway
equipment and amusement ride industries.
Specify VFI™ Spray Foams
|
